gowrite操作问题

Various tips, tricks and known issues

Moderator: lpaatero

Post Reply
ycwq
Posts: 2
Joined: Wed May 04, 2022 8:05 am

gowrite操作问题

Post by ycwq »

9路或者13路棋谱在批量输出时会输出整个的19路棋谱,只有单独输出时才可以完整显示9路或者13路棋盘,如何解决这个问题呢?谢谢!
lpaatero
Go liiton hallitus
Posts: 528
Joined: Fri May 21, 2004 12:20 pm
Location: Finland

Re: gowrite操作问题

Post by lpaatero »

Hi and sorry for answering in English.

I am not sure I understood the situation correctly.
Can you send me or paste here an example of SGF you made?
If I undertood correctly, the problem happends when you are exporting the SGF. The problem may depend on the export format (or many other things). Can you explain the steps you have taken, so that I could re-create the problem?

Regards,
Lauri
ycwq
Posts: 2
Joined: Wed May 04, 2022 8:05 am

Re: gowrite操作问题

Post by ycwq »

你好!
感谢你的回复,我将问题详细说明一下:
gowrite在输出13路或者9路棋谱时,单个sgf输出是正确的,如果导入文件夹批量输出棋谱时则会是整个19路棋盘,
不知道我的叙述是是否清楚,论坛似乎无法上传图片来说明。谢谢!
lpaatero
Go liiton hallitus
Posts: 528
Joined: Fri May 21, 2004 12:20 pm
Location: Finland

Re: gowrite操作问题

Post by lpaatero »

Thank you for reporting this.
I have finally found the issue, fix will be in gowrite 3.1.8

Regards,
Lauri
Post Reply